| Attribute/Logical Rolename |
Domain |
Datatype |
NULL |
Definition |
Dvc Type Id |
|
VARCHAR(25) |
NO |
Device Identifier: The unique identifier for the device. The identifier consists of the concatenation of the following fields: System ID, Subsystem ID, Device Qualifier, Device Type and Device Instance. |
| SW Jump |
Indicator |
CHAR(1) |
NO |
Software Jumper: |
| Beam Off |
Machine Mode Ind |
BINARY(1) |
NO |
Beam Off: Indicates all systems are off. |
| Standby |
Machine Mode Ind |
BINARY(1) |
NO |
Standby: Indicates the system is in warm standby mode. |
| MPS Test |
Machine Mode Ind |
BINARY(1) |
NO |
MPS Test: MPS Test Mode Indicator |
| MEBT_BS_10US |
|
BINARY(1) |
NO |
Source 10 US: SRC Only - Empty channels default to 1, Otherwise default = 0 |
| MEBT_BS_50US |
|
BINARY(1) |
NO |
Source 50 US: SRC Only |
| MEBT_BS_100US |
|
BINARY(1) |
NO |
Source 100 US: SRC Only |
| SRC 10us |
Machine Mode Ind |
BINARY(1) |
NO |
Source 10 US: SRC Only - Empty channels default to 1, Otherwise default = 0
|
| SRC 50us |
Machine Mode Ind |
BINARY(1) |
NO |
Source 50 US: SRC Only
|
| SRC 100us |
Machine Mode Ind |
BINARY(1) |
NO |
Source 100 US: SRC Only
|
| SRC 1ms |
Machine Mode Ind |
BINARY(1) |
NO |
Source 1ms: SRC Only
|
| SRC Fullpwr |
Machine Mode Ind |
BINARY(1) |
NO |
Source Full Power: SRC Only
|
| DTL 10us |
Machine Mode Ind |
BINARY(1) |
NO |
TL 10 US |
| DTL 50us |
Machine Mode Ind |
BINARY(1) |
NO |
TL 50 US |
| LDMP 10us |
Machine Mode Ind |
BINARY(1) |
NO |
Linac Dump 10us: Indicates a 10us beam to the Linac Dump. |
| LDMP 50us |
Machine Mode Ind |
BINARY(1) |
NO |
Linac Dump 50 US: Indicates a50us beam to the Linac Dump. |
| LDMP 100us |
Machine Mode Ind |
BINARY(1) |
NO |
Linac Dump 100 US: Indicates a 100us beam to the Linac Dump. |
| LDMP 7_5kw |
Machine Mode Ind |
BINARY(1) |
NO |
Linac Dump 7.5 KW: Indicates a 7.5kw beam to the Linac Dump. |
| LDMP Fullpwr |
Machine Mode Ind |
BINARY(1) |
NO |
Linac Dump Full Power: Indicates a full power beam to the Linac Dump. |
| IDMP 10us |
Machine Mode Ind |
BINARY(1) |
NO |
Injection Dump 10 US: Indicates a 10us beam to the Injection Dump. |
| IDMP 50us |
Machine Mode Ind |
BINARY(1) |
NO |
Injection Dump 50 US: Indicates a 50us beam to the Injection Dump. |
| IDMP 100us |
Machine Mode Ind |
BINARY(1) |
NO |
Injection Dump 100 US: Indicates a 100us beam to the Injection Dump. |
| IDMP 1ms |
Machine Mode Ind |
BINARY(1) |
NO |
Injection Dump 1 MS: Indicates a 1ms beam to the Injection Dump. |
| IDMP Fullpwr |
Machine Mode Ind |
BINARY(1) |
NO |
Injection Dump Full Power: Indicates a full power beam to the Injection Dump. |
| Ring 10us |
Machine Mode Ind |
BINARY(1) |
NO |
Ring Storage Mode 10 US: Indicates a 10us ring storage mode. |
| Ring 50us |
Machine Mode Ind |
BINARY(1) |
NO |
Ring Storage Mode 50 US: Indicates a 50us ring storage mode. |
| Ring 100us |
Machine Mode Ind |
BINARY(1) |
NO |
Ring Storage Mode 100 US: Indicates a 100us ring storage mode. |
| Ring 7_5mw |
Machine Mode Ind |
BINARY(1) |
NO |
Ring Storage Mode 7.5 MW: Indicates a 7.5 mw ring storage mode. |
| Ring Fullpwr |
Machine Mode Ind |
BINARY(1) |
NO |
Ring Storage Mode Full Power: Indicates a full power ring storage mode. |
| EDMP 10us |
Machine Mode Ind |
BINARY(1) |
NO |
Extraction Dump 10 US: Indicates a 10us beam to the extraction dump. |
| EDMP 50us |
Machine Mode Ind |
BINARY(1) |
NO |
Exctraction Dump 50 US: Indicates a 50us beam to the extraction dump. |
| EDMP 100us |
Machine Mode Ind |
BINARY(1) |
NO |
Extraction Dump 100 US: Indicates a 100us beam to the extraction dump. |
| EDMP 7_5mw |
Machine Mode Ind |
BINARY(1) |
NO |
Extraction Dump 7.5 MW: Indicates a7.5mw beam to the extraction dump. |
| EDMP Fullpwr |
Machine Mode Ind |
BINARY(1) |
NO |
Extraction Dump Full Power: Indicates a full power beam to the extraction dump. |
| Target 10us |
Machine Mode Ind |
BINARY(1) |
NO |
Target 10 US: Indicates a 10us beam to the target. |
| Target 50us |
Machine Mode Ind |
BINARY(1) |
NO |
Target 50 US: Indicates a 50us beam to the target. |
| Target 100us |
Machine Mode Ind |
BINARY(1) |
NO |
Target 100 US: Indicates a100us beam to the target. |
| Target 1ms |
Machine Mode Ind |
BINARY(1) |
NO |
Target 1MS: Indicates a 1ms beam to the target. |
| Target Fullpwr |
Machine Mode Ind |
BINARY(1) |
NO |
Target Full Power: Indicates a full power beam to the target. |
| Dvc Type Sgnl Nm |
Signal Name |
VARCHAR(50) |
YES |
Input Signal Name: The signal name that carries the trip information to the channel. |
| Input Sgnl Nontrip Val |
|
VARCHAR(10) |
YES |
Input Signal Good Value: The binary value of the trip isgnal in it's good state. This is necessary because there is not consistency across the signals. In some cases 0 indicates a good state and in others it indicates a trip. |