| Attribute/Logical Rolename |
Domain |
Datatype |
NULL |
Definition |
Device Identifer |
Device Id |
VARCHAR(50) |
NO |
Device Identifier: The unique identifier for the device. It is represented in the form of a bar code. The identifier consists of the concatenation of the following fields: System ID, Subsystem ID, Device Qualifier, Device Type and Device Instance. |
| RF Multi Gap Ind |
Indicator |
CHAR(1) |
NO |
RF Multigap Indicator |
| Dsgn Freq |
|
NUMERIC(12, 6) |
YES |
Design Frequency: Cavity design frequency (MHz)
|
| TTF |
|
NUMERIC(12, 6) |
YES |
Transit Time Factor |
| Angle Calib |
|
NUMERIC(12, 6) |
YES |
Angle Calibration: Default is "0" |
| Ampl Calib |
|
NUMERIC(12, 6) |
YES |
Amplitude Calibration: Default is "1" |
| Cav Lngth |
|
NUMERIC(12, 6) |
YES |
Cavity Length: Cavity Length in meters. |
| T0 Coef |
|
NUMERIC(12, 6) |
YES |
T0 Coefficient: Constant for the T fit with beta.
|
| T1 Coef |
|
NUMERIC(12, 6) |
YES |
T1 Coefficient: Linear term coefficient for the T fit with beta. |
| T2 Coef |
|
NUMERIC(12, 6) |
YES |
T2 Coefficient: Quadratic term coefficient for the T fit with beta. |
| TP0 Coef |
|
NUMERIC(12, 6) |
YES |
TP0 Coefficient: Constant for the T-prime fit with beta. |
| TP1 Coef |
|
NUMERIC(12, 6) |
YES |
TP1 Coefficient: Linear term coefficient for the T-prime fit with beta. |
| TP2 Coef |
|
NUMERIC(12, 6) |
YES |
TP2 Coefficient: Quadratic term coefficient for the T-prime fit with beta. |
| S0 Coef |
|
NUMERIC(12, 6) |
YES |
S0 Coefficient: Constant for the S fit with beta. |
| S1 Coef |
|
NUMERIC(12, 6) |
YES |
S1 Coefficient: Linear term coefficient for the S fit with beta. |
| S2 Coef |
|
NUMERIC(12, 6) |
YES |
S2 Coefficient: Quadratic term coefficient for the S fit with beta. |
| SP0 Coef |
|
NUMERIC(12, 6) |
YES |
SP0 Coeffiecient: Constant for the S-prime fit with beta. |
| SP1 Coef |
|
NUMERIC(12, 6) |
YES |
SP1 Coefficient: Linear term coefficient for the S-prime fit with beta. |
| SP2 Coef |
|
NUMERIC(12, 6) |
YES |
SP2 Coefficient:Quadratic term coefficient for the S-prime fit with beta. |
| Struct Type Ind |
|
CHAR(1) |
YES |
Structure Type Indicator: The cavity structure type. 0 = 0 mode; 1 = pi mode. |
| T0 End Coef |
|
NUMERIC(12, 6) |
YES |
T0 End Cell Coefficent: The end cell protperty of the cavity. |
| T1 End Coef |
|
NUMERIC(12, 6) |
YES |
T1 End Cell Coefficent: The end cell protperty of the cavity. |
| Q Loaded |
|
NUMERIC(12, 6) |
YES |
Q Loaded: The measured cavity quality factor including external attachements. |
| Standard Medium Number |
Standard Medium Number |
NUMERIC(14, 3) |
YES |
|
| T2 End Coef |
|
NUMERIC(12, 6) |
YES |
T2 End Cell Coefficent: The end cell protperty of the cavity. |
| TP0 End Coef |
|
NUMERIC(12, 6) |
YES |
TP0 End Cell Coefficent: The end cell protperty of the cavity. |
| TP1 End Coef |
|
NUMERIC(12, 6) |
YES |
TP1 End Cell Coefficent: The end cell protperty of the cavity. |
| TP2 End Coef |
|
NUMERIC(12, 6) |
YES |
TP2 End Cell Coefficent: The end cell protperty of the cavity. |
| S0 End Coef |
|
NUMERIC(12, 6) |
YES |
TP0 End Cell Coefficent: The end cell protperty of the cavity. |
| S1 End Coef |
|
NUMERIC(12, 6) |
YES |
S1 End Cell Coefficent: The end cell protperty of the cavity. |
| S2 End Coef |
|
NUMERIC(12, 6) |
YES |
S2 End Cell Coefficent: The end cell protperty of the cavity. |
| SP0 End Coef |
|
NUMERIC(12, 6) |
YES |
SP0 End Cell Coefficent: The end cell protperty of the cavity. |
| SP1 End Coef |
|
NUMERIC(12, 6) |
YES |
SP1 End Cell Coefficent: The end cell protperty of the cavity. |
| SP2 End Coef |
|
NUMERIC(12, 6) |
YES |
SP2 End Cell Coefficent: The end cell protperty of the cavity. |