View calibration results for all test points to access calibration result information for all calibration work orders and equipment.
Follow these steps to view calibration results for all test points.
Open the Calibration results form (WOCALR).
Query for the test points for which to view calibration results.
Choose one of the following options to indicate the type of test point for which to display:
As found—Select to display only "as found" results.
As left—Select to display only "as left" results.
Both—Select to display both "as found" and "as left" results.
Choose one of the following options to indicate the status type for which to display test point results.
Pass—Select to display only test points resulting in a passing status, which includes test points with Recal status.
Fail—Select to display only test points resulting in a failing status.
All—Select to display all test points, which includes test points with Not applicable status.
|
If you are in query mode, click Advanced Search to enter additional selection criteria to query for more specific calibration results. |
View the calibration results information.
|
You can use either the forms toolbar or the up and down arrow keys to navigate between records. Scrolling through records updates the work order information displayed in the bottom of the form based on the test point you are viewing. |